-
Description
Some of the most important adjustments you can make to your table saw are to ensure your fence and blade are parallel to your miter slot, there is no blade runout, and your arbor is running true. You will not believe how well your table saw will cut when the above adjustments are performed accurately. In addition, getting your blade and fence parallel to your miter slot will improve the safety of your saw by minimizing kickback. This jig can also be used to test for router and drill press run out and to set your jointer infeed and outfeed tables coplanar and to set knives coplanar to the outfeed table.
This jig is designed and engineered in the USA.
Specifications:
Dial Indicator:
- Range: 0-1" Indicator
- Resolution - Decimals down to 0.001"; Fractions down to 64ths Repeatability - 0.001"
- Accuracy +/- 0.001" per 1"
- Black adjustable limiters on dial allow starting and stopping values or to set for a specific height range.
- Bezel locking knob
Miter Bar (the piece that slides in any standard 3/8" x 3/4" miter slot)
- 6” long with rare earth magnets and spring expansion anvils to keep it tight in the miter slot while also allowing it to slide easily up and down the miter slot.
- Machined from hardened aluminum alloy and anodized and will never rust.
Slider Bar (the piece that mounts to the above Miter Bar)
- 9” x 3/4" and has a 6-3/4" long machined slot to allow adjustment and can be locked down tight with the included hex screw. A hex wrench is included.
- Allows an indicator to be mounted horizontal or vertical.
- Machined from hardened aluminum alloy and anodized and will never rust.
- Measuring range from miter slot: 3-1/2" to 11"
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
